This marking guide can acomodate all styles of handles and any type of cabinet knob, the scale for handles will suit 32mm, 64mm, 96mm, 128mm, 160mm, 192mm, 224mm, 256mm, 288mm and 320mm hole centres and up to a 796mm width of drawer front so an easy way to mark out correctly on each and every door or drawer.
Step 1 - Firstly, determine the distance from the top of the door where the first hole is required.
Step 2 - Then determine the distance from the side of the door where the first hole is required.
Step 3 - Using either a 2 mm pilot drill bit or an brad awl, mark the door where the first hole is required.
Step 4 - For standard hole centre, simply read off the scale the desired hole centres and mark the door with the position of the second hole.
|Accessories Type||Cabinet Accessories|
5.00 Average 1 Review
A very good company and customer service matters too. Very prompt delivery and items were of a very good quality too.